Log in
A manufacturing process developed by Bradford researchers has revolutionised the way endodontists perform root canal treatments. When coated with a hydrophilic polymer, the highly-filled hygroscopic material has enabled UK company DRFP to develop SmartPoint — a new endodontic technique that dramatically reduces failure rates of root canal treatments from 11-30% over five years to approximately 1%, and gives lower levels of post-operative pain when compared with conventional techniques. The technology has won three awards for innovation and DRFP has expanded significantly, with a dedicated production facility and sales team offering visits to dentists to demonstrate the benefits of the technology.
Initial research into polymer nanocomposites and their formation took place at Strathclyde from 2000 - 2010. This was followed by a collaboration with the world's largest manufacturer of composite kitchen sinks, Carron Phoenix Limited, through a 6-year Knowledge Transfer Partnership (KTP) which resulted in a successful new production process of its high-end synthetic granite kitchen sinks. This led to £4 million of capital investment in new production facilities at their Falkirk site, enabling the company to sustain its leading position in the designer kitchen sink market and retain its workforce of over 400 employees in central Scotland, including the 170 workers in the composite sink division in Falkirk. Within the REF period, the research has led to the manufacture and sale of in excess of one million kitchen sinks, generating sales revenue in excess of over £50M and supporting the UK economy.
Researchers in QUB developed the first commercial process control system (Rotolog) and simulation software (RotoSim) for the Rotomoulding Plastics Industry. There has also been recent commercialisation of a new energy-saving system, the Rotocooler.
The fundamental understanding of the process that was developed also enabled the moulding of new materials for new application areas, notably motorcycle fuel tanks (now used by BMW, Ducati, Harley Davidson and Honda) and the world's first concept car made from sustainable polymers.
Global economic and environmental impact arises from a significantly more efficient process, better product quality, a greater selection of processable materials and thus increased sales.
Cranfield University's research in computational fluid dynamics (CFD), turbulence models, studies of instabilities and the development of multi-scale methods has reduced the computational uncertainty in the modelling and simulation used by the Atomic Weapons Establishment (AWE) to support the safety and performance of nuclear weapons.
Cranfield's research in compressible turbulent flow for Low Mach numbers is now employed to increase accuracy in CFD codes employed by the German Aerospace Agency DLR, Pennsylvania State University, and the French Commissariat a l'Energie Atomique, which use this work to model flows ranging from turbulent mixing through inertial confinement fusion (ICF) to scramjets.
The production of plastic (polymer) waste and the difficulties associated with its disposal is a major environmental challenge. Many polymer food packaging structures are made using thermoforming processes in which hot thin oil-based polymer sheets are forced under pressure into moulds and then cooled to become thin-walled packaging structures. These structures are not eco-friendly and do not degrade after use. Thus unless they are recycled, which is a complicated process and mostly does not happen, these structures cause major environmental problems worldwide.
Researchers in Brunel Institute of Computational Mathematics (BICOM) have undertaken extensive computational modelling of the thermoforming of packaging structures made from bio-materials (thermoplastics). This computational work, together with the necessary laboratory experiments which were executed by Brunel engineers, has contributed to a far better understanding of the behaviour of starch-based biodegradable food packaging. In turn, the availability of such knowledge has contributed to the steady move by food packagers and food retailers towards the adoption of such packaging which is helping to reduce the amount of long term non-biodegradable waste produced.
Powder handling research at the Centre for Numerical Modelling and Process Analysis (CNMPA) enables industries to reduce the risk in new powder processes and to troubleshoot existing ones. The study focuses on two closely-related projects that have resulted in a series of instruments, analysis techniques, training and spin-out research that has found application in a large number of companies all over the world, in a wide range of industries. The case is typical of the influence that the CNMPA has had on industry awareness and practice in the UK and globally.
The impact presented is the use of research carried out in the School of Chemical Engineering by a range of multinational food industries (inc. Unilever, Cargill, PepsiCo) to engineer a series of fat-reduced foods such as low fat spreads (LFS), dressings, margarine, sauces and mayonnaise. This has allowed them to build up a portfolio of novel low fat products; this portfolio would be much reduced or in some cases non-existent without the research contribution and capability generated by the Birmingham group as stated by Peter Lillford5.1 (former Chief Scientist, Unilever) and John Casey, (Vice President Biological Sciences, Unilever)5.2. These products are a significant and growing market segment e.g. LFS now outsell margarine/butter in a number of countries and are estimated to be worth globally 10 Billion Euros per year between 2008-13. Thus these products are having a significant impact on the industries' profitability. In addition, consumption of low fat foods act to tackle obesity with knock on effects for government (health service, lost GDP etc.) and the community as a whole.
Methods to improve control over thermally-induced solid state transformations have been developed in Huddersfield and applied to materials synthesis and materials characterisation. Impact is being felt by catalyst and adsorbent manufacturers, where feedback-controlled thermal and microwave methods allow improved control of morphology, surface area and porosity, and possibly the nature of surface sites. New thermal characterisation methods, some based on these principles, plus calorimetric adsorption, modulated differential calorimetric and high speed thermal methods, are being applied to catalytic/adsorbent materials. The information arising from these studies is bringing economic benefit to manufacturers. The same techniques are also being applied to pyrotechnic materials, in work which has been credited with making a significant contribution to defence research in the UK and overseas.
Research at Heriot-Watt University (HWU) has led to the development of a new continuous oscillatory baffled reactor and crystalliser technology. This has direct economic and environmental impact in the chemical, pharmaceutical and food industries. Waste is substantially reduced, while the scale of the equipment and plant is dramatically decreased, reducing time to market, start-up and maintenance costs and on-going energy usage. The reactor/crystalliser was taken to market through a spinout, NiTech Solutions Ltd, with a peak of 16 employees in the REF period. Genzyme (now Sanofi) has implemented NiTech's technology for biopharmaceutical manufacture since 2007, with multi-100 ton production and sales of multi-£100M pa. The technology now underpins the larger-scale joint venture, the Continuous Manufacture and Crystallisation (CMAC) consortium, launched in 2010. CMAC has attracted over £60M investment, much of it from three major industrial partners, GSK, AstraZeneca and Novartis, with additional second-tier investors. CMAC is accelerating the introduction of new process-intensification technologies in the process industries.
Novel vapour sorption experimental methods for the characterisation of complex particulate materials have been developed in the Department of Chemical Engineering. This research and expertise resulted in the creation of Surface Measurement Systems Limited (SMS), whose Dynamic Vapour Sorption (DVS) and Inverse Gas Chromatography (IGC) instruments are now found in >500 laboratories around the world. They are recognised standard research and development tools in the global pharmaceutical industry (DIN 66138). SMS has contributed >270 man-years of employment and generated £27M of turnover, whilst SMS instruments have generated over £300M of economic value, over the REF period.