Log in
Research carried out in the School of Mathematics at the University of Bristol between 1998 and 2005 has been instrumental in the development of structures that arrest or deflect the rapid flow of snow that characterises avalanches in mountainous regions of the world. The research has been embodied in a series of guidance documents for engineers on the design of such structures and many defence dams and barriers have been built across Europe since 2008. The guidance is now adopted as standard practice in many of the countries that experience avalanches. Investment in avalanche defence projects based on the design principles set out in the guidance runs into tens of millions of pounds. The Bristol research is also used internationally in the training of engineers who specialise in avalanche protection schemes. Given the scale of the threat to life and property from these potent natural hazards, the impact of the research is considerable in terms of the societal and economic benefits derived from the reduction of the risk posed by snow avalanches.
Since the 1970's the influence of aerodynamics on racing car design has risen substantially, and now in the modern era it is seen as one of the most important factors in producing a race-winning car. Research carried out in the Department of Aeronautics at Imperial College London, into flow control techniques and the development of cutting-edge numerical and experimental methods has allowed specific and significant improvements in the aerodynamic design of Formula One racing cars. This has led to reduced lap times and a more competitive racing environment. These advances have also contributed to improving handling, resulting in a safer racing environment. This research has provided the Formula One industry, which has an estimated annual turnover of $2 billion, with a means to employ engineers who have the key knowledge and insights that allow them to continue to innovate in a tightly controlled engineering environment. The Chief Designer or Chief Aerodynamicist in six out of the twelve 2012 F1 teams have carried out relevant research at Imperial College London.
Commercialisation: Through government grants, institutional and private investors, a medical devices company (Vascular Flow Technologies) was founded.
Products: Spiral Laminar Flow™ Vascular Grafts for use in bypass for peripheral arterial disease and vascular access for haemodialysis.
Market / Sales: Spiral Laminar Flow™ Grafts are sold in 18 countries, with over 3000 grafts implanted (<1% estimated market size) and sales in excess of £1million.
Patient Outcomes: Published and presented clinical series show the grafts have increased survival rates leading to reduced re-interventions and reduced amputations.
Multiphase flow research at Imperial has developed bespoke software code, and provided unique data for validation of commercial codes used for oil-and-gas design. This research has enabled global oil companies (e.g. Chevron) to undertake successfully the design of deep-water production systems requiring multi-billion pound capital investments. This research has also allowed SPT Group (now owned by Schlumberger), one of the largest software (OLGA) providers to the oil industry, to maintain their position as market leaders.
Our flow modelling and process optimisation research has improved significantly the scientific understanding of key industrial coating, printing and droplet flow systems. We have implemented our research findings in software tools for staff training and process optimisation which have enabled: (i) the worldwide coating industry to improve the productivity and sustainability of their manufacturing processes; (ii) [text removed for publication]; (iii) a major automotive supply company to develop an award-winning droplet filtration system for diesel engines. [text removed for publication].
Coal fired power stations will be a major element of global power generation for the foreseeable future. Measurement, and hence control, of pulverised fuel flow is a vital technology for the efficient and green operation of coal fired power stations. Balancing fuel delivery and combustion stoichiometry increases boiler efficiency and reduces emissions. Research in this area carried out at Teesside University was adopted by ABB Ltd and led to the commercial development of new powder flow measurement systems (PfMaster technology) installed in power stations around the world. Quantifiable economic benefits of the installations to date amount to >£3.4 M with concomitant environmental benefits of significant reduction in CO2 and NOxemissions and solid waste disposal burdens.
Research at GCU led to a novel method for backfilling pipeline tunnels providing the ability to fill tunnels three times more quickly than the traditional method resulting in a cost saving of £1.5M on a single project. This approach is now best practice at Murphy Pipelines Ltd (MPL) and features in current tenders to a value of £30M. The change in fill material lowered the carbon footprint by 5000 tonnes in a CEEQUAL award winning project, in addition, the removable fill material allows the recycling and re-use of tunnels, adding to the assets of the company and reducing costs.
Our research has been key to the development of investor confidence in an emerging UK tidal stream industry. We have contributed to the development and validation of commercial and open- source software for tidal stream system design and our expertise has been instrumental to the successful delivery of major objectives of two national industry-academia marine energy projects commissioned by the Energy Technologies Institute (ETI). Taken together, these outcomes have reduced engineering risks that had been of concern to potential investors. Investor confidence in tidal energy has been increased, as highlighted by Alstom's £65m acquisition of a turbine developer following a key outcome of the ETI ReDAPT project.
Work and tool temperature are major issues in abrasive machining. Cooling fluids, usually oil based, are used to control these temperatures. This research aimed to achieve much more effective use of coolant. The established industrial practice was to use very high volumes of oil, under very high pressures. This is an expensive and environmentally unfriendly approach. This research improved coolant flow quality by improving nozzle design and established the underlying physics to improve penetration of coolant into the cutting zone. It then went on to show that it was not only possible, but sometimes it may actually be beneficial, to dramatically reduce coolant flow volume by a factor of up to 20,000. Before industry would adopt these ideas it was necessary to have firm scientific evidence of their validity. This research by the General Engineering Research Institute (GERI) provided that foundation and has led to successful adoption by industry, which has in turn led to both economic and environmental impact. This case study will evidence industrial take-up via specific examples and shows that GERI's research in this area has had a global impact on the training of industrial engineers employing the grinding process.
A total of 34 British Olympic Gold medal triumphs in Beijing (2008), Vancouver (2010) and London (2012), [redact 14 words] relied to a greater or lesser extent on research in fluid dynamics, instrumentation and [redact 4 words] originating from the University of Southampton's Performance Sport Engineering Laboratory (PSEL). Global media coverage of the science behind these victories has raised the profile of British engineering. PSEL was awarded a 2012 Queen's Anniversary Prize for its sustained contribution to the competitiveness of the UK's sailing and motorsport industries worldwide through its research, specialist consultancy services and its high-quality engineering graduates.